Personnel Qualification; Personal Protective Equipment - Sav 245.09 Operating Instructions Manual

SAV 245.09 /.10 /.99
2.2

Personnel qualification

The minimum age for personnel is 18 years.
The personnel have to know and understand the interactions with the higher level machine/system and any other
machine/system parts.
The personnel have to be familiar with the regulations on health and safety and accident prevention.
Operating personnel
To exclude possible errors and hazards, only authorised persons are permitted to work with the precision sine
tables. The operator has responsibility towards third parties in the working area.
Qualified personnel
The precision sine tables with electro permanent magnetic chuck/electromagnetic chuck may only be maintained,
serviced and repaired by instructed and authorised qualified personnel with adequate training (e.g. metalworker,
mechanic). Qualified personnel have to have read and understood the operating instructions.
2.3

Personal protective equipment

Always wear safety goggles for protection against ejected swarf.
Wear safety shoes and safety gloves during all work.
Wear safety goggles
2 SAFETY
NOTE!
The responsibilities for different tasks on the machine must be clearly
specified and observed. The owner must make the operating instructions
accessible to the operator and must ensure that the operator has read and
understood these. Also note the operating instructions for magnetic chucks,
polarity reversal control units, slip ring assemblies and sine table.
Wear safety gloves
[ ]
46
Wear safety shoes
Version 1.0