Table of Contents
Advertisement
5.
If the oil is above the H mark, drain the excess engine oil from drain
valve
, and check the oil level again.
6.
If the oil level is correct, tighten the oil filler cap securely and close
the engine hood.
REMARK
When checking the oil level after the engine has been operated, wait
for at least 15 minutes after stopping the engine before checking.
If the machine is at an angle, make it horizontal before checking.
CHECK FUEL LEVEL ADD FUEL
When adding fuel, never let the fuel overflow. This may cause a
fire. If spilling fuel, thoroughly clean up any spillage.
1.
Open the pump room door on the right side of the machine and use
sight gauge
on the rear face of the fuel tank to check that the tank
is full.
2.
If the fuel level is not within the sight gauge, add fuel through filler
port
while watching sight gauge
Fuel capacity 240 liters
NOTICE
For details of the fuel to use, see "20. USE OF FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE".
3.
After adding fuel, tighten the cap securely.
REMARK
If breather hole (1) on the cap is clogged, the pressure in the dank
will drop and fuel will not flow.
Clean the hole from time to time.
WARNING
.
12.OPERATION
2-39
Advertisement
Table of Contents
