Table of Contents
Advertisement
24.5.2 CHECK OIL LEVEL IN SWING MACHINERY
CASE, ADD OIL
The oil is at high temperature immediately after the machine has
been operated. Wait for the oil to cool down before carrying out
this check.
1.
Remove dipstick
2.
Insert dipstick
fully in the guide.
3.
When dipstick
is pulled out, if the oil level is between the H and L
marks of the gauge, oil level is proper.
4.
If the oil does not reach the L mark on dipstick
through dipstick insertion hole
When refilling, remove bleeding plug
NOTICE
For details of the oil to use, see "20. USE OF FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE".
5.
If the oil level exceeds the H mark on the dipstick, loosen drain plug
to drain the excess oil.
6.
After checking oil level or adding oil insert the dipstick into the hole
and install air bleeding plug
WARNING
and wipe the oil from the dipstick with a cloth.
.
.
.
, add engine oil
24. SERVICE PROCEDURE
3-49
Advertisement
Table of Contents
