Table of Contents
Advertisement
6 GENERAL PRECAUTIONS
PROTECTION AGAINST FALLING OR FLYING OBJECTS
If there is any danger of falling or flying objects hitting the operator, install protective guards in place to protect
the operator as required for each particular situation.
• For work with breakers, install a front guard on the windshield. Also, place a laminate coating sheet over the
windshield.
• For demolition of shear workk, install a front guard on the windshield and a top guard on the cab. Also, place
a laminate coating sheet over the windshield.
• For work in mines, quarries, demolition, tunnels or other places where there is danger of falling rocks, put
FOPS (falling object protective structure) in place. Also, place a laminate coating sheet over the windshield.
The above comments are made with regards to typical working conditions. By all means you should put on
other guards if required by conditions at your particular site.
For details of safety guards, please contact your Komatsu distributor.
Also, even for other types of work, if there is any danger of being hit by falling or flying objects or of objects
entering the operator's cab, select and install a guard that matches the working conditions.
Be sure to close the front window before commencing work.
When carrying out the above operations, make sure to keep all persons other than the operator outside that
range of falling or flying objects. Be particularly sure to maintain a proper distance when carrying out shear
operations
1-6
WARNING: for reasons of
safety, always follow these
safety precautions.
Advertisement
Table of Contents
