28. MACHINES READY FOR ATTACHMENTS
3.
CONTROL PEDAL.
This is used to operate the attachment.
Pedal for one line attachment (with auto deceleration mechanism)
Pedal for two line attachment (with auto deceleration mechanism)
The breaker is operated with right pedal
4.
LOCK PIN
This locks the control pedal.
Position
:
Lock.
Position
:
Free (when using breaker or attachment with large oil
flow, such as crusher or power ripper)
Position
:
Free (when using attachment with small oil flow, such
as slide arm)
Keep the lock pin in the LOCK position except when using the attachment.
5-6
.