Table of Contents
Advertisement
11. EXPLANATION OF COMPONENTS
11.13 FUSIBLE LINK
If the starting motor will not rotate when the starting switch is turned
ON, a possible cause is disconnection of wire-type fusible link (1). Open
the battery room door on the left side of the machine body to inspect the
fusible link and, if necessary, replace it
REMARK
A fusible link refers to the large-sized fuse wiring installed in the high
current flow portion of the circuit to protect electrical components and
wiring from burning, similarly to an ordinary fuse.
11.14 CONTROLLERS
Governor pump controller is provided
NOTICE
•
Never splash or spill water, mud or drink over the controllers as
this may cause a fault.
•
If a fault occurs in the controller, do not attempt repair but con-
sult your Komatsu distributor.
11.15 TOOL BOX
This is used for keeping the tools.
11.16 GREASE PUMP HOLDER
This is inside the battery room door on the left side of the machine.
Fit the grease pump to the holder when it is not being used.
2-34
Advertisement
Table of Contents
