Setting The Driver's Seat - Kärcher MC 250 Manual

13.Check the fluid level in the windscreen washer reser-
voir, see chapter 14.7.1 Filling the wiping water contain-
er
14.Type pressures and tyre wear
15.Check that the lighting and flashing system function
16.Ease of movement of the accelerator pedal
17.Are the temperature indicator and fuel level indicator
functioning?

10.2 Setting the driver's seat

DANGER
Danger of accident
Only adjust the driver's seat when the vehicle is stationary.
CAUTION
Risk of damage
Do not use the folded backrest as a storage area when
driving on public roads or secure accordingly
ATTENTION
Only the seats listed below and offered by Kärcher may be
used. Otherwise the vibration values cannot be guaran-
teed.
Note
The driver's seat is automatically damped.
Note
If there is no passenger seat, there is a directly accessible
storage compartment
Kärcher offers 3 variants of driver's seats:
 Seat König K210MVGL-P350-W2
Horizontal adjustment
1
Pull the lever upwards to adjust
Driver's seat with air suspension
2
Backrest inclination adjustment
3
Lumbar support adjustment
4
Seat belt
5
Seat heater switch
6
Headrest
7
Pull out or push in for height adjustment
Arm rest with control panel
8
Passenger seat (option)
9
 Seat Cobo SC47M-M200 (shown without arm rest)
Driver's seat
1
Horizontal adjustment
2
Pull the lever upwards to adjust
Damping setting for driver weight
3
Seat belt
4
Lever, fold backrest
5
Headrest
6
Pull out or push in for height adjustment
 Seat Grammer MSG75GL / 522 (shown without arm
rest)
Driver's seat with air suspension
1
Height adjustment
2
Horizontal adjustment
3
Pull the lever upwards to adjust
Seat belt
4
Backrest inclination adjustment
5
1. Adjust the inclination, height and position of the left arm
rest for operating the control panel.
English 55