Speakers - HP OMEN X 17 Maintenance And Service Manual

Speakers

NOTE: The speaker spare part kit includes the cable.
Description
Speaker Kit (includes right and left speakers)
IMPORTANT:
and replacement.
Before removing the speakers, follow these steps:
1. Shut down the computer.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices connected to the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
Remove the speakers:
1. Carefully disconnect the speaker connector (1) from the system board.
2. Remove the two Phillips screws (2).
3. Release the display cable from the routing channels (3).
4. Lift the left and right speakers (4) to remove them.
Reverse this procedure to install the speakers.
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
38)
31)
Spare part number
940616-001
Component replacement procedures 45