Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures - HP OMEN X 17 Maintenance And Service Manual

5 Removal and replacement procedures for
Customer Self-Repair parts
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
NOTE: The Customer Self-Repair program is not available in all locations. Installing a part not supported by the
Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer Self-
Repair is supported in your location.

Component replacement procedures

NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are
on the service tag at the bottom of your computer. See
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow
the on-screen instructions.
There are two screws that must be removed, replaced, and/or loosened when servicing Customer Self-Repair
parts. Make special note of the screw sizes and locations during removal and replacement.
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Labels on page 17 for details.