HP Compaq Presario,Presario X1001 Software Manual

Bluetooth Getting Started Guide
The Bluetooth integrated device provided with your computer
comes with the required software preloaded. However, before
you can use your local Bluetooth device, the software must be
installed and configured. The Software Setup application
included with your computer will assist you in installing the
Bluetooth software. After the software has been installed,
the Bluetooth Setup Wizard can be used to facilitate the
configuration of service and security features of your wireless
product. During the initial configuration, you can also locate
other devices that provide a particular service and configure
access to those services.

Software Installation

If your computer is equipped with the Bluetooth integrated
device, you must install the Bluetooth software that has been
preloaded in the image of your computer. To install the software
for your Bluetooth device, perform the following steps:
1. Select Start > All Programs > Software Setup.
2. When the Software Setup Welcome window is displayed,
select Next.
3. Select the check box next to the Bluetooth software driver to
enable the software for installation and select Next.
4. Select Finish to complete the installation and to reboot the
computer.
✎
Proceed to the
A software item that is enabled to install via Software Setup will
have a check mark in the check box next to it. Deselect all items
that you do not want to install before selecting Next to continue
with installation of the Bluetooth software.
"Hardware Enabling" section.