Bosch Rexroth ID 40 Manual page 149

10.7.3.1 Web interface data output
The ID 40 web interface responds to every valid read command with an XML string.
This string contains the following XML elements:
• XML header, Cascading Style Sheets (CSS) for displaying data in browsers, <xid>
framing element. These elements are not relevant to gathering the requested data.
• <bal-mem>
All requested data areas are shown consecutively here
• <bal-range>
One of the requested data areas
• <offset>
The start address of this data area
• The data bytes themselves.
Every data byte is designated by its own error flag and executed as an XML tag with
the byte
<b> byte: no error
<ec> error connection: error transmitting between MDT and SLK;
these locations are displayed as follows: <ec>??</ec>
<ed> error device: byte read from flagged MDT data area
Example of an XML string
<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet href="/id40xml.css" type="text/css"?
<xid>
<bal-mem>
<bal-range>
<offset>0x0000</offset>
<data>
<data>
</bal-range>
</bal-mem>
</xid>
<b>0x37</b>
<b>0x36</b>
<b>0x35</b>
<b>0x34</b>
<b>0x33</b>
3 842 530 344/2014-05, MIT: ID 40, Bosch Rexroth AG
PROOF COPy 1 | 20.05.2014 | FOR INTERNAL USE ONLy
Web interface 149/176