ADTRAN ATLAS 800PLUS User Manual page 66

Chapter 5. Using the Terminal Menu
SNMP
Write security: 3; Read security: 5
Provides a way to configure SNMP access for the
information on SNMP, refer to "SNMP Management" on page 9-1. The following
options are available for review and editing:
5-14
Port Speed
Write security: 2; Read security: 5
Specifies the baud rate of the port. Select either 2400 or 9600. If you are using
Dial for Port Type, ensure that the Port Speed setting matches the modem baud
rate.
Modem Initialization String
Write security: 2; Read security: 5
Specifies the initialization string for a modem. Refer to your modem docu-
mentation for acceptable initialization strings.
Initialize Modem
Write security: 4; Read security: 5
Sends the Modem Initialization string to the modem. When you select this
command, the following message displays: Please verify a modem is con-
nected to the chain port before continuing. Confirm (y/n). Ensure that a
modem is connected before selecting Y.
Flow Control
Write security: 2; Read security: 5
This option sets the flow control for the chain port. You may configure the
chain port flow control for OFF or H/W (hardware).
SNMP Access
Write security: 3; Read security: 5
Defines whether SNMP access to the
Select the appropriate option.
SNMP Communities
Write security: 3; Read security: 5
Defines SNMP manager(s) characteristics. The following options are available
for review and editing:
PLUS
_
ATLAS 800
ATLAS_
PLUS
ATLAS_ 800
User Manual
PLUS
800 . For detailed
is enabled or disabled.
61200226L1-1