Table of Contents
Advertisement
Chapter 8. Updating Firmware
TFTP FIRMWARE UPDATING
Update Firmware Using TFTP
1.
2.
3.
4.
5.
6.
7.
8.
8-4
The ATLAS product supports updating of firmware to any module
via the 10BaseT port using TFTP from a network server. The network
server must be capable of supporting TFTP server requests from the
TFTP Client within ATLAS.
Obtain the appropriate update file for the particular module from ADTRAN
Technical Support. For more information on how to contact ADTRAN
Technical Support, refer to "Warranty and Technical Support Information" on
page C-1.
Copy the update file provided by ADTRAN to a network server that supports
TFTP server requests. Please record the IP address of the server and full path
location of the update file to be downloaded by the ATLAS TFTP client.
Log in to ATLAS using a Telnet program.
A Level 2 password is required for performing updates of any modules within AT-
LAS. Please consult the ATLAS administrator if this password is not known.
Select the System Utility menu.
Select the Update Firmware option to gain access to the Update Firmware menu
interface for performing updates. This menu is shown in Figure 8-2.
Move to the Module Slot field.
Press Enter and select the appropriate slot of the module to update.
To update multiple modules of the same type, select All Modules of a Type for the
Module Slot field.
After selecting a slot number, the Module Type field updates to reflect the type
of unit selected (this field is read-only).
The Module Type field is normally a read-only field indicating the type of
module that is currently in the selected slot. If you choose All Modules of a
Type for the Module Slot field, the Module Type field becomes configurable to
indicate the type of modules to update in the ATLAS. Select the appropriate
module type for the particular update (see Figure 8-2 on page 8-5).
PLUS
_
ATLAS
800
User Manual
61200226L1-1
Advertisement
Table of Contents
