Table of Contents
Advertisement
Max Telnet Sessions
Write security: 3; Read security: 5
Defines the maximum number of Telnet sessions that can be active at the same
time. Enter a number between 0 and 100 in this field.
Ethernet Port
Write security: 2; Read security: 5
Provides a way to configure various settings for the Ethernet port. The following
options are available for review and editing:
Chain Port
Write security: 2; Read security: 5
Supplies options for configuring the chain-in port.
61200226L1-1
If you enter zero in this field, you will not be able to use Telnet. Only enter zero if
you want to completely lock out Telnet access.
Port Name
Defines the name of the Ethernet port. You can leave this field blank.
IP Address
Lists the address assigned to the base Ethernet port. This address is com-
posed of four decimal numbers, each in the range of 0 to 255, separated by
periods. This value is set to 0.0.0.0 by default. The IP address is used for the
10BaseT Ethernet interface. Obtain the correct IP address from your LAN
administrator.
Default Gateway
Defines or changes the default gateway. Enter the default gateway address by
entering a decimal number into the appropriate field and then pressing Enter
to move to the next field. You will need a default gateway if the LAN contains
multiple segments. This address is composed of four decimal numbers, each
in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by
default. Contact your LAN administrator for the appropriate address.
Subnet Mask
Defines which part of a destination IP address contains the network number.
This address is composed of four decimal numbers, each in the range of 0 to
255, separated by periods. This value is set to 0.0.0.0 by default. This part of
the destination IP address is used along with the
to determine which nodes must be reached through the default IP gateway.
Port Name
Write security: 2; Read security: 5
Defines the name of the chain port. Type in an alpha-numeric name up to 57
characters long. The name can include spaces and special characters.
Port Type
Write security: 2; Read security: 5
Specifies whether you use Direct or Dial mode.
PLUS
_
ATLAS
800
Chapter 5. Using the Terminal Menu
ATLAS_
User Manual
PLUS
800
IP address
5-13
Advertisement
Table of Contents
