Table of Contents
Advertisement
Chapter 8. Updating Firmware
15. The Previous Update Status field indicates the results of the last firmware
16. After completing the configuration of all the above parameters, select the
17. During the TFTP upload process, various status messages will be provided in
18. When the update process has completed successfully, the menu screen will
19. If the update of the module was successful, the module will either restart
20. To update additional modules, go to Step 6 and select the appropriate slot.
8-6
update for the particular slot chosen. If a firmware update has not been
attempted for the particular slot, the Previous Update Status will display Has
not been attempted.
Begin Firmware Update field to activate the update process. This field requires
user confirmation and will set up the module to initiate a TFTP upload with
the specified network server. Once the update process begins, this field
changes to Cancel Update to allow you to cancel the current update in
progress.
the Current Update Status field to indicate progress. These are described as
follows:
TFTP -
Contacting Server
TFTP -
Beginning TFTP Transfer
TFTP - Completed
TFTP -
Error: File Not Found
TFTP -
Error: Access Violation
TFTP -
Error: Illegal Operation
TFTP -
Error: User aborted
display Idle in the Current Update Status field and Module Update Complete
in the Previous Update Status field. In the event an error occurred during the
update process, the Previous Update Status field will display the appropriate
error message. Please go to step 7 and attempt the update process again. If
the same error occurs, please contact ADTRAN Technical Support.
immediately and resume operation or restart at the specified time and day of
the week, depending on your selection.
PLUS
_
ATLAS
800
Indicates communication with the TFTP
network server is trying to be established
with the specified server address in the
TFTP Server IP Address field.
Indicates communication with the TFTP
network server has been established and
the update file is being transferred
between ATLAS and the TFTP network
server.
Indicates the ATLAS product successfully
received the update file.
Indicates the TFTP network server was
unable to locate the specified file name or
path in the TFTP Server Filename field.
Indicates the TFTP network server denied
ATLAS access to the given update file
name and path. Please verify
appropriate user rights are selected for
the specified path.
An unknown operation was detected by
ATLAS when transferring the update file
from the TFTP network server.
Indicates the user selected Cancel Update
to abort reception of the update file from
the TFTP network server.
User Manual
61200226L1-1
Advertisement
Table of Contents
