Figure 6-2. Slot 0 Module Configuration Menu - ADTRAN ATLAS 800PLUS User Manual

Chapter 6. Creating a Dedicated Map
Name
T1-A
Data
T1-B
Data
T1-C
Data
T1-A
Voice
T1-B
Voice
T1-C
Voice
Configure the Ports
1.
6-2
Table 6-1. Connections
PLUS
ATLAS 800
Controller T1
Slot 0 Port 1
Controller T1
Slot 0/Port 2
Quad T1/PRI
Slot 1/Port 1
Controller T1
Slot 0/Port 1
Controller T1
Slot 0/Port 2
Quad T1/PRI
Slot 1/Port 1
From the Terminal menu, navigate to the Module menu and select Controller T1/
PRI port (slot 0). Select Menu [+], then the Configuration submenu, then set the
line framing parameters. Once properly configured to match the framing
parameters of the T1 line being provided by the Telco, copy the configuration
information by navigating to the first column (port index number) of this port
and pressing C. (See Figure 6-2.)

Figure 6-2. Slot 0 Module Configuration Menu

PLUS
ATLAS 800
DS0s Name
9-24 V.35 - A
RBS Off
9-24 V.35 - B
RBS Off
9-24 V.35 - C
RBS Off
1-8 T1-D
RBS On
1-8 T1-D
RBS On
1-8 T1-D
RBS On
User Manual
DS0s
ATLAS 800
PLUS
Port
Quad V.35 N/A
Slot 2/Port 1
Quad V.35 N/A
Slot 2/Port 2
Quad V.35 N/A
Slot 2/Port 3
Quad T1/PRI 1-8
DSX
RBS On
Slot 1/Port 2
Quad T1/PRI 9-16
DSX
RBS On
Slot 1/Port 2
Quad/PRI DSX 17-24
Slot 1/Port 2 RBS On
61200226L1-1