Table of Contents
Advertisement
Product Specific Safety Rules
WARNING
Always use the electric screwdriver and controller as a set.
Using other power supplies could result in a fire or accident.
CAUTION
This tool is not an impact type electric screwdriver. Do not tighten twice (extra tightening). Also, it cannot be
used for screw tightening of such things as wood or drywall.
Depending on fastening conditions, screws may become loose.
Improper impacts could decrease product life or cause product failure.
Do not use the tool for anything other than screw tightening.
It should not be used for tasks such as drilling or threading (such as a tapper).
About Unit Notation
This instruction manual is written using both SI units and the imperial measurement method (yards, pounds).
Numeric values outside the ( ) are the value in SI units, while those inside the ( ) are the imperial measurement
value.
Notation Example: Length 25.4 (1")
Weight: 0.45 (1)
in
mm
Torque: 1.13 (10)
lbs
kg
EN
Lb·in
Nm
1
Advertisement
Table of Contents
