Product Specific Safety Rules - Nitto Kohki DLV30S06L-AY Instruction Manual

Product Specific Safety Rules

WARNING
z Use the dedicated power supply at all times.
z
This tool requires a dedicated power supply provided by our company. Using other power supplies could result in
a fire or accident.
z Do not look directly into the LED (light-emitting part) from close up.
z
Powerful LED light could damage your eyes. Also, do not point the LED (light-emitting part) at people's or
animals' eyes.
CAUTION
z Do not apply shock (such as dropping) or excessive load to the motion setting unit (LED or button).
z
Doing so could cause a failure.
z This tool is not an impact type electric screwdriver. Do not tighten twice (extra tightening). Also, it cannot be
z
used for screw tightening of such things as wood or drywall.
Depending on fastening conditions, screws may become loose.
Improper impacts could decrease product life or cause product failure.
z Do not use the tool for anything other than screw tightening.
z
It should not be used for tasks such as drilling or threading (such as a tapper).
z The relationship between the speed and the speed level is standard.
z
About Unit Notation
This instruction manual is written using both SI units and the imperial measurement method (yards, pounds).
Numeric values outside the ( ) are the value in SI units, while those inside the ( ) are the imperial measurement
value.
Notation Example: Length 25.4 (1")
TV07521-1_DLV30S12P-AYK_en.indb 1
Weight: 0.45 (1)
in
mm
Torque: 1.13 (10)
lbs
kg
EN
Lb·in
Nm
1
2017/02/10 15:56:29