Advertisement
Table of Contents
- 1 Extrusion Quality and Tip Maintenance
- 2 Troubleshooting: Material Is no Longer Coming out of the Gun
- 3 Troubleshooting: Deformed Bead
- 4 Troubleshooting: Extrusion of Intermittent Material
- 5 Troubleshooting: Fluid Leak
- 6 Troubleshooting: Fluid Leak in Front of the Gun
- 7 Troubleshooting: Fluid Leak Around the Needle
- 8 Troubleshooting: Fluid Leak from the Trigger End of the Gun
- Download this manual
EXTRUSION
MANUAL
SPRAY GUN
250 BAR / 3627 PSI
500 BAR / 7251.5 PSI
Troubleshooting guide
TRANSLATION OF THE ORIGINAL MANUAL
Before assembly and start-up, please read and clearly understand all the
IMPORTANT :
documents relating to the equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR
NOTICE.
KREMLIN - REXSON
l
150, avenue de Stalingrad
93 245 - STAINS CEDEX – France
: 33 (0)1 49 40 25 25
Fax : 33 (0)1 48 26 07 16
www.kremlin-rexson.com
KREMLIN REXSON
N° : 578.143.110-UK-1208
Advertisement
Table of Contents
Related Manuals for Kremlin-Rexson 250 BAR / 3627 PSI
Summary of Contents for Kremlin-Rexson 250 BAR / 3627 PSI
- Page 1 EXTRUSION MANUAL SPRAY GUN 250 BAR / 3627 PSI 500 BAR / 7251.5 PSI Troubleshooting guide TRANSLATION OF THE ORIGINAL MANUAL Before assembly and start-up, please read and clearly understand all the IMPORTANT : documents relating to the equipment (professional use only).
- Page 2 Replace needle assembly Fluid leak in front of the gun (model 250 bar / 3627 psi) / the ball Ball or ball seat misplaced (model 500 bar / 7251.5 psi) and the ball seat*. Ball or ball seat are dirty Clean the ball and the ball seat*.
Need help?
Do you have a question about the 250 BAR / 3627 PSI and is the answer not in the manual?
Questions and answers