Page 1
INSTRUCTION MANUAL TWO COMPONENT GUN # 106 036 00 (manual) # 106 067 00 (automatic) Manual : 574.035.112 - 1111 Date : 16/11/11 - Supersede : 04/03/08 Modif.: Update TRANSLATION OF THE ORIGINAL MANUAL Before assembly and start-up, please read and clearly understand all the documents IMPORTANT : relating to this equipment (professional use only).
INSTRUCTION MANUAL TWO COMPONENT GUN TABLE OF CONTENTS 01. WARRANTY ................................2 02. SAFETY INSTRUCTIONS............................2 03. EXPLODED VIEW..............................5 04. PARTS'LIST ................................6 05. MAINTENANCE ..............................7 06. DISASSEMBLY..............................7 07. GUN ASSEMBLY..............................8 Dear Customer, You are the owner of our new equipment and we would like to take this opportunity to thank you. To make sure your investment will provide full satisfaction, special care has been taken by KREMLIN REXSON during all designing and manufacturing processes.
01. WARRANTY We reserve the right to make changes; these changes may be carried out after the receipt of the order. No claim will be accepted as a consequence of any change carried out in the instruction manuals or in the selection guides.
Page 4
PICTOGRAMS Nip hazard Warning moving Warning moving Warning moving Do not exceed High pressure elevator parts shovel this pressure hazard Relief or drain Warning hose Wear of glasses Wear of gloves is Product vapor Warning hot parts valve under pressure is obligatory obligatory hazard...
Page 5
CAUTION! It is forbidden to use material containing high concentrations of halogenated hydrocarbon solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause explosion risk causing serious or fatal injury. EQUIPMENT REQUIREMENTS Guards (air motor cover, coupling shields, housings,…) have been designed for a safe use of the equipment.
SPECIFIC PARTS # 106 036 00 Désignation Description Bezeichnung Denominación Qté 106 094 00 Poignée ( voir doc. Handle (refer to doc. Handgriff (siehe doc. Empuñadura 574.073.110) 574.073.110) 574.073.110) (consultar doc. 574.073.110) 05. MAINTENANCE Guards (air motor cover, coupling shields, housings …) have been designed for safe use of the equipment.
Take off the 2 heads (26) fitted with the 2 fittings (24A), NOTA : The assembly of a fitting (24A) would damage the gun needles. Block the adjustment part (7) with the 10 mm / 0.4" wrench, unscrew then the nut (11) with the 7 mm / 0.27"...
Need help?
Do you have a question about the 106 036 00 and is the answer not in the manual?
Questions and answers