1. Manuals
  2. Brands
  3. Kremlin-Rexson Manuals
  4. Paint Sprayer
  5. J 5
  6. Instruction manual

Kremlin-Rexson J 5 Instruction Manual

Airspray gun
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

INSTRUCTION MANUAL
AIRSPRAY GUN - MODEL J 5
Notice/Manual : 0211
573.079.110
Date : 26/11/02– Annule/Supersede : 10/09/01
Modif. Assembly instructions
KREMLIN - 150, avenue de Stalingrad - 93245 STAINS Cédex- FRANCE
Téléphone : 33 (0)1 49 40 25 25 Télécopie : 33 (0)1 48 26 07 16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the J 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kremlin-Rexson J 5

Summary of Contents for Kremlin-Rexson J 5

  • Page 1 INSTRUCTION MANUAL AIRSPRAY GUN - MODEL J 5 Notice/Manual : 0211 573.079.110 Date : 26/11/02– Annule/Supersede : 10/09/01 Modif. Assembly instructions KREMLIN - 150, avenue de Stalingrad - 93245 STAINS Cédex- FRANCE Téléphone : 33 (0)1 49 40 25 25 Télécopie : 33 (0)1 48 26 07 16...

  • Page 2: Ec Declaration Of Conformity For Machinery

    Do not aim the gun towards individuals or animals. 3. TECHNICAL FEATURES Our range of J 5 airspray guns is composed of : conventional guns (models J 5, J 5 A, J 5 G), low pressure guns (models J 5 LP, J 5 GLP), low pressure guns (models J 5 VLP, J 5 GVLP).

  • Page 3: Supply System

    An air pressure of 4 bar / 58 PSI is required at the gun handle to obtain a 0.7 bar / 10 PSI reading on the test gauge at the gun aircap ; it will result in an optimum performance of the J 5 GVLP and J 5 VLP guns.
  • Page 4 7. CLEANING The gun is a precision instrument and it relies on good and frequent maintenance for its correct operation. If stopped for a long time, lubricate all movable parts, axes and springs with grease. Never use chemicals.Never use metal brushes, files, points or clips for dismantling. SHORT BREAKS (LESS THAN 3 HOURS) : Remove the paint on the air cap, with a brush and solvent.
  • Page 5 JET TOO THICK IN THE CENTER This is the reverse of the above defect. The paint output is too high for the selected air pressure : increase − the spraying air pressure and reduce the paint output. If the paint is too thick, dilute it. −...
  • Page 6 PERMANENT AIR LEAK AT THE GUN AIR CAP WHEN THE TRIGGER IS RELEASED Remove the trigger to ensure that the needle runs free. Check that the rod is not jammed. Otherwise, the air valve is worn, change the air valve assembly. ASSEMBLY INSTRUCTIONS Ind.

Table of Contents