Tools Required For Assembly; Assembly - NOMA Alabaster Owner's Manual

6
Toll Free: 1-866-827-4985 model no. 052-1196-4

TOOLS REQUIRED FOR ASSEMBLY

3
This manual is designed to make it as easy as possible for you to assemble, install, operate and maintain
the ceiling fan. The following tools listed are required for assembly and installation:
After opening the package you should find all the necessary parts for installing this ceiling fan.
The box should include:
5 fan blades
5 decorative fan blade arms
1 motor with light kit assembly
1 decorative housing
1 glass shade
1 mounting bracket with complete installation

ASSEMBLY

Preparing for installation
Getting ready
. Unpack and inspect carefully to make sure all parts are
included and not damaged (see Fig. 1). Lay all pieces out
on a working space.
possible electrical shock (see Fig. 2).
Choosing a location for the ceiling fan
32" (81.3 cm) from adjacent walls or obstructions.
. Choose a location where there is a high enough ceiling clearance (at least 6' 11" (2.1 m) from the
floor to the ceiling fan's lowest moving part).
·
. Ensure that the outlet box in the room's ceiling can support the weight of the fan. Typically, if the
outlet box is marked acceptable for fan support, it can hold the fan securely.
Installation
1. Mounting bracket
. Remove the four sets of side screws from
mounting bracket and save for future use.
Normal masonry ceiling
.
Securely attach the mounting bracket to
an outlet box marked "Acceptable for Fan
Support", using the supplied outlet box
screws with lock washers (see Fig. 3a).
Wooden ceiling
.
Drill two mounting holes in the ceiling
joist. Securely attach the mounting
bracket to the wooden ceiling as
indicated below (fig. 3b).
1 star-head screwdriver
1 flat-head screwdriver
1 wrench
Parts pack containing:
2 wood screws with flat washers
2 mounting screws with lock washers
1 extra blade arm screw with spring washer
3 wire connectors
16 blade screws
2 pull chains with fobs
1 "J" hook
1 zip tie
1
3a
3b
3b
Mounting
bracket
Wood screw
1 stepladder
1 wire stripper/pliers
electrical tape
2
1
Lock washers 2
3
Outlet box screws
Flat
washer