Tools Required For Assembly; Assembly - NOMA Miles Instruction Manual

TOOLS REQUIRED FOR ASSEMBLY

This manual is designed to make it as easy as possible for you to assemble, install, operate and maintain
the ceiling fan. The following tools listed are required for assembly and intallation:
After opening the package you should find all the necessary parts for installing this ceiling fan.
The box should also contain:
Parts Pack Containing:
2 wood screws with flat washers
2 5/32" screws with lock washers
3 wire connectors
16 blade screws with washers
1 "J" hook
1 zip tie

ASSEMBLY

Preparing for installation
Getting ready
. Unpack and inspect carefully to make sure all parts are
included and not damaged (see Fig. 1). Lay all pieces out
on a working space.
possible electric shock (see Fig. 2).
Choosing a location for the ceiling fan
32" (81.3 cm) from adjacent walls or obstructions.
. Choose a location where there is a high enough ceiling clearance (at least 2.1 m (6' 11") from the floor
to the ceiling fan's lowest moving part).
. Ensure that the outlet box in the room's ceiling can support the weight of the fan. Typically, if the
outlet box is marked "acceptable for fan support" , it can hold the fan securely.
Mounting options
Drop-mount (for normal ceilings)
. This method is preferred if the ceiling is sloped or vaulted, or if the ceiling
is extra high, requiring the need of a downrod (see Fig. 3).
. Follow steps 1 to 9, omitting step 2 in the manual.
1 x star-head screwdriver
1 x flat screwdriver
1 x wrench
1 x stepladder
1 x wire stripper/pliers
1 x electrical tape
3 balance pieces
3 tape
1 instruction sheet
1
2
re
3
3