Browser Setup Panel - Mark Levinson 5206 Owner's Manual

BROWSER SETUP PAGE (BSP)
The BSP is a highly convenient means of keeping the
firmware of your preamplifier up to date and for performing
setup functions. It is accessed via a major web browser on
a PC or tablet. In order to access the BSP, you must first
connect the unit to your Local Area Network (LAN). If there is
no easy access to a LAN there are other means of setup and
control, discussed elsewhere in this manual.
• Connect the Ethernet port on the rear panel of the N
to an Ethernet port on your home network's router, switch
or hub with a Category 5e or Category 6 Ethernet cable.
• Find the IP address of your unit by navigating through the
Setup menu to Advanced/Network/IP.
• Open a browser in a PC or tablet that is connected to your
home LAN.
• Enter the IP address of your unit in the address line.
• The preamplifier's Browser Setup Panel Home page will
appear on the screen.
• The BSP controls are intuitive and behave much like the
front panel and remote controls.
NOTE: We do not recommend using the BSP as a
substitute for the front panel, remote control or 5Kontrol
App for real-time volume, input selection or any other
5206
0
listening mode functions due to network latencies.
N 5206 PREAMPLIFIER / OWNER'S MANUAL
0
CONTROL
15