Mark Levinson 5206 Owner's Manual page 33

Table of Contents

Advertisement

MOVING-COIL MODE
Input Resistance:
Gain:
Total Harmonic Distortion:
Signal-To-Noise Ratio:
Maximum Input Level:
DIGITAL-TO-ANALOG CONVERTER STAGE
Output Voltage:
Frequency Response:
Total Harmonic Distortion:
Signal-To-Noise Ratio:
Sample Rates/Bit Depth:
Digital Processing:
HEADPHONE OUTPUT
Total Harmonic Distortion:
Output Overload:
Signal-To-Noise Ratio:
Output Impedance:
Selectable, 37Ω to 1000Ω
69dB at 1kHz
<0.01%, 1kHz, 2V RMS output; <0.05%, 20Hz to 20kHz, 2V RMS output
>68dB, 20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output
>6.5mV at 1kHz; >19mV at 20kHz
5.6V RMS at 0dBFS, maximum volume, single-ended outputs
11.2V RMS at 0dBFS, maximum volume, balanced outputs
20Hz to 20kHz, +0/–0.05dB (44.1kHz/16 bit signal); 20Hz to 20kHz, +0/–0.02dB (192kHz/24 bit signal)
<0.0025%, 20Hz to 20kHz, 3V RMS single-ended output [with 44.1kHz/16 bit signal]
<0.002%, 20Hz to 20kHz, 6V RMS balanced output [with 44.1kHz/16 bit signal]
<0.002%, 20Hz to 20kHz, 3V RMS single-ended output [with 192kHz/24 bit signal]
<0.0017%, 20Hz to 20kHz, 6V RMS balanced output [with 192kHz/24 bit signal]
<0.004%, 90kHz, 3V RMS single-ended output [with 192kHz/24 bit signal]
<0.003%, 90kHz, 6V RMS balanced output [with 192kHz/24 bit signal]
>92dB, 20Hz to 20kHz, wideband, unweighted, with 44.1kHz/16 bit signal
[referred to 3V RMS single-ended or 6V RMS balanced output]
>98dB, 20Hz to 20kHz, wideband, unweighted, with 192kHz/24 bit signal
[referred to 3V RMS single-ended or 6V RMS balanced output]
PCM: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, or 384kHz; up to 32 bits; DSD: Native or DoP; single,
double, or quad speed (2.8, 5.6, or 11.2MHz)
Full MQA decoding; PCM: Seven user-selectable digital filter settings;
user-selectable up-sampling to 352.8/384kHz; DSD: Four user-selectable digital filter settings
<0.04%, 20Hz and 1kHz, 2V RMS output, 30Ω load; <0.1%, 20kHz, 2V RMS output, 30Ω load
>3.3V RMS, 30Ω load
>88dB, 20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output
<2.5Ω, 20Hz to 20kHz
N
5206 PREAMPLIFIER
/
OWNER'S MANUAL
0
SPECIFICATIONS
31

Advertisement

Table of Contents
loading

Table of Contents