Setup Menu - Mark Levinson N052 Owner's Manual

setuP menu

setuP menu
This section explains the use of the Setup menus on your N
which allow you to customize and configure the unit.
Setup MeNu NavigatioN
Pressing the Setup button displays the Setup menu on the
Controller's front-panel display. When the Setup menu is active,
use the Select knob to scroll through options, the Enter button
to select and deselect options, and the Volume knob to adjust
parameters. To move back a level in the menu structure (or exit
the Setup menu), press the Setup button repeatedly until the
desired menu is shown in the display.
iNput Setup
Setup Menu
Input Setup
Volume Control
Power Mgmt
Advanced
The Input Setup menu allows you to customize the following
parameters for the selected input:
The following settings are available for all inputs.
Name: This option offers a choice of preset names for the
selected input (CD, SACD
the following special names:
Unused: This option removes the selected input from the list
of available inputs. The input will be skipped when selecting
the active input.
Note: To prevent noise due to the input's high gain
factor, if you are not connecting a phono source to the
Phono input set the Phono input name to "Unused."
4 N 52 RefeReNce PReamPlifieR
0
Input Setup
Set Input 1
Set Input 2
Set Input 3
Set Input 4
Set Input 5
Set Input 6
Set Input 7
Set Phono
, DVD, Blu-ray , DAC, EQ) as well as
™ ™
/ Owner's Manual
52,
0
Set Input X
Name=XXX
Gain=XXX
Offset=XXX
SSP=XXX
Aux=XXX
Mono=XXX
Ph Gain=XXX
Ph Bal=XXX
20Hz HPF=XXX
R Load=XXX
C Load=XXX
Manual Entry: This option allows you to enter a custom
name for the selected input. Use the Select knob to select
the character you want to change, use the Volume control
to choose from the list of available characters and press
the Enter button to confirm each character. After the eighth
character is entered, the new name will be saved.
Not Available for
Phono Input
Available only for
Phono Input