Front Panel - Mark Levinson 380 Owner's Manual

1 2
display
intensity
monitor
1 2 3
mono
7

Front Panel

1
2
3 4
mode
record select balance
4 5 6
8
Display Intensity Button
Cycles among four levels of brightness (including "off ") for the
display, allowing adjustment for various ambient lighting condi-
tions. When "off," the display will turn on for a few seconds when-
ever a setting is changed. When used in conjunction with certain
compatible Mark Levinson components, this button will control
the display intensity of all linked components. (For more infor-
mation, see "Linked Functions.")
Alphanumeric Display
Provides a wide range of information concerning the operational
status of the Nº380. The information displayed depends on the
operating mode the Nº380 is in (determined by the
ton). The information displayed is summarized below:
monitor
record select
balance
In addition, when used with Mark Levinson power amplifiers that
incorporate our communications link circuitry, this display is
used to indicate the presence of a fault condition (if any) in the
amplifier. Please refer to the owner's manual of your amplifier for
more information. For more detailed information on the
preamplifier's use of this display, see "Operational Modes."
5 6
inverted
polarity
mute
9
Selected (audible) Source and Volume
"RECD" and Source to be recorded
Direction and Magnitude of Offset
PREAMPLIFIER Nº 380
standby
10
but-
mode
11