Installation; Unpacking, Placement And Ventilation - Mark Levinson 5206 Owner's Manual

INSTALLATION

INSTALLATION
UNPACKING
When unpacking your N
0
• Save all packing materials in case you need to ship your
preamp in the future.
• Inspect your preamp for signs of damage during
shipment. If you discover damage, contact your
authorized Mark Levinson
making appropriate claims.
• Locate and remove the accessories from the shipping
carton. Make sure that all of the items listed below are
included. If any are missing, contact your authorized
Mark Levinson dealer.
1 x IEC power cord (terminated according to the region to
which the unit is shipped)
1 x Remote control plus 2 x AAA batteries
1 x Owner's manual
1 x Safety information sheet
1 x Hex tool for remote
Please register your N
purchase. Register online at www.MarkLevinson.com.
Retain your original, dated sales receipt as proof of
warranty coverage.
4 N 5206 PREAMPLIFIER
0
5206:
dealer for assistance in
®
5206 within 15 days of your
0
/ OWNER'S MANUAL
PLACEMENT AND VENTILATION
• Install the preamplifier on a shelf with several inches
of clearance above it to ensure proper ventilation. DO
NOT install the preamplifier inside of an enclosed
cabinet or rack.
• Ensure that you install the preamplifier on a solid, flat
and level surface.
• Install the preamplifier as close as possible to associated
audio components to keep interconnecting cables as
short as possible.
• Select a dry, well-ventilated location that is out of direct
sunlight.
• DO NOT expose the N
0
humidity, steam, smoke, dampness, or excessive dust.
5206 to high temperatures,