Mark Levinson 5206 Owner's Manual page 22

SETUP
BT Name:
This displays the Bluetooth Name that will appear on your
Bluetooth player device when scanning to pair. This name
cannot be changed.
The following setting is available only for the
asynchronous USB input:
DSD Filter: This setting lets you set the low-pass filter
characteristic for DSD high-resolution digital content.
You can select from roll-offs that begin at 47kHz, 50kHz,
60kHz or 70kHz. The audible effects of the different roll-off
characteristics are subtle and will vary depending on the
type of musical content and the high-frequency bandwidth of
your speakers and headphones. Feel free to experiment to
find the DSD filter setting that sounds best to you.
The following settings are available only for the Phono
input of the N 5206:
O
Cartridge Type: Select either moving magnet (MM) or
moving coil (MC) cartridge.
Infrasonic Filter: This option sets the infrasonic "rumble"
filter on or off.
Balance: This option applies balance adjustment to the
Phono input from -3dB to +3dB in 0.5 dB steps.
NOTE: After connecting all source components to the
N 5206, we suggest using the Setup menu to set the
0
names of all inputs that are not being used to "Disabled."
This action will remove the unused inputs from the list
of available inputs, thereby making source selection
faster and more convenient.
20 N 5206 PREAMPLIFIER
0
/ OWNER'S MANUAL