Position Of Fins At The Discs - Tatu Marchesan DCCO 2500 Instruction Manual

Adjustments and operations

Position of fins at the discs

The rotating discs feature 04 adjustable fins to provide uniformity during the application,
both at high and low dosages.
The change of the fin angles at the discs provides the change in the application band
width and in the direction of the product.
Position 1 - Medium width of distribution and directing the product to an intermediate
position.
Position 2 - Larger width of distribution and directing the product to the ends.
Position 3 - Smaller width of distribution and directing the product to the center.
If it is required to change part of the product direction to provide a better uniformity
during the distribution, it is possible to adjust the two fins that have different angles from
the others, changing its positions at the disc.
1
28 DCCO 2500, 5500, 7500 and 10500
2 1 3
2
3
Marchesan Implementos e Máquinas Agrícolas "TATU" S.A.
1 2
1
2