Working Preparation; Hitching To The Tractor - Tatu Marchesan DCCO 2500 Instruction Manual

Working preparation

Hitching to the tractor

Hitch the drawbar to the tractor using the pin (A) and cotter pin. In order to make it
easier to hitch, use the hydraulic jack adjustment (B).
NOTE
• The round hole of the tractor hitching must face upwards.
• After making the hitching let the hydraulic jack (B) in transport/operation
position, as shown in the figure below.
• Keep the tractor drawbar fixed in the center.
B
DCCO 7500 hitching
Rotation direction of the
rotating discs
Marchesan Implementos e Máquinas Agrícolas "TATU" S.A.
Hydraulic jack in
transport position
DCCO 2500 and 5500
hitching
A
A
A
NOTE Couple the quick couplers to the
hydraulic output with an approximate
flow rate of 45 l/min and be sure that
the discs are rotating as indicated in
the figure.
DCCO 2500, 5500, 7500 and 10500
DCCO 10500 hitching
21