Tatu Marchesan DCCO 2500 Instruction Manual page 3

Introduction
The lime and organic compound spreader model DCCO performs
the uniform distribution of lime, organic compound and plaster with
a higher income, greater product economy and extremely simple
operation.
DCCO 2500, DCCO 5500, DCCO 7500 and DCCO 10500 models
have cardan shafts and a hydraulic motor to activate the conveyor,
belt and rotating discs.
The tandem wheelset type (DCCO 5500, 7500 and 10500) has
four tires that precisely follow the soil topography.
The conveyor is made of carbon steel and has tighteners to
adjust the tension.
The opening of the dosing gate have a graduated scale and an
easy adjustment to distribute several quantities.
The fins are adjustable on the discs and can perform an adequate
distribution of several products.
It allows the application of different amounts (high or low
amounts), always respecting the agronomical recommendation.
This instructions manual contains the necessary information for
the best performance of the spreader. The operator must carefully
read the entire manual before working with the equipment. Also,
read and understand the safety recommendations.
For any further clarification or in the event of technical problems
that may arise during the service, consult your dealer and the
Technical Support department of the factory. They can ensure the
fully functioning of your TATU spreader.
Marchesan Implementos e Máquinas Agrícolas "TATU" S.A.
DCCO 2500, 5500, 7500 and 10500 1