Appendix A System Specifications - American Megatrends StorTrends 1100-P User Manual

Appendix A
Feature
Processors
Chipset
Memory Capacity
DIMM Sizes
Operating Systems
Supported
Serial ATA Controller
Serial ATA Backplane
Main Drive Bays
Peripheral Bays
PCI Expansion Slots
Motherboard
Chassis
Weight
System Cooling
System Input
Requirements
Power Supply
BTU Rating
Operating Environment
System Specifications
Description
Single Intel® Pentium® 4 processor of up to 3.40 GHz with HT
technology (processors must be 0.09 or 0.13 micron technology) or
Intel® Celeron® processors of up to 2.80 GHz at a 800/533/400
MHz front side bus speed
Intel E7210
Four (4) DIMM slots to support a maximum of 4 GB ECC
unbuffered DDR400/333 low-profile SDRAM (dual-channel
memory)
128 MB / 256 MB / 512 MB / 1 GB 184-pin modules supported
Windows NT, Windows 2000, Solaris, NetWare, SCO UNIX and
Linux
6300ESB controller hub incorporated into chipset
SATA backplane (CSE-SATA-813) for four (4) SATA drives
Four (4) drive bays to house four (4) standard 1" SATA drives
One (1) slim CD-ROM drive
One (1) 64-bit 66 MHz (3.3V) PCI-X slot (bundled with a riser card)
•
Model: StorTrends 1100 motherboard (ATX Form Factor)
•
Dimensions: 12 x 9.5 in (305 x 241 mm)
•
Model: StorTrends 1100 chassis (1U Rackmount)
•
Dimensions: (WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504
mm)
Gross Weight: 38 lbs. (17.3 kg.)
Three (3) 4-cm high performance fans (FAN-0061)
•
AC Input Voltage: 100-240 VAC
•
Rated Input Current: 5A (115V) to 2A (230V)
•
Rated Input Frequency: 50 to 60 Hz
•
Rated Output Power: 300W (Model# SP302-1S, Part# PWS-
0054)
•
Rated Output Voltages: +3.3V (15A), +5V (15A), +12V1
(15A), +12V2 (15A), 12Vtotal (20A), -12V (1A), +5Vsb (2A)
•
1470 BTUs/hr (for rated output power of 300W)
•
Operating Temperature: 10º to 35º C (50º to 90º F)
•
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
•
Operating Relative Humidity: 8% to 90% (non-condensing)
•
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Appendix A : System Specifications 51