Installing The Server Into The Rack; Figure 2-2. Installing The Server Into A Rack - American Megatrends StorTrends 1100-P User Manual

Installing the Server into the Rack

You should now have rails attached to both the chassis and the rack unit. The next step is
to install the server into the rack. Do this by lining up the rear of the chassis rails with the
front of the rack rails. Slide the chassis rails into the rack rails, keeping the pressure even
on both sides (you may have to depress the locking tabs when inserting). See Figure 2-2.
When the server has been pushed completely into the rack, you should hear the locking
tabs "click".

Figure 2-2. Installing the Server into a Rack

12 StorTrends® 1100 User's Guide