Wake-On-Ring
The Wake-On-Ring header is designated WOR. This function allows your computer to
receive and be "awakened" by an incoming call when in the suspend state. See the table
below for pin definitions. You must also have a WOR card and cable to use this feature.
Wake-On-Ring Pin Definitions (WOR)
Pin
1
2
ATX PS/2 Keyboard and PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/2 mouse are located on J11. The mouse port is above
the keyboard port. See the table below for pin definitions.
PS/2 Keyboard and Mouse Port Pin Definitions (J11)
Pin
1
2
3
4
5
6
Universal Serial Bus (USB)
There are two Universal Serial Bus ports located on the I/O panel and an additional two
USB headers located on the motherboard. These headers, labeled USB3/4, can be used to
provide front side chassis access (cables not included). See the tables below for pin
definitions.
USB1/2 Pin Definitions
Pin
1
2
3
4
USB3/4 Pin Definitions
Pin
1
3
5
7
36
StorTrends® 1100 User's Guide
Definition
Ground
Wake-Up
Definition
Data
NC
Ground
VCC
Clock
No Connection
Definition
+5V
P0-
P0+
Ground
Definition
Pin
+5V
2
P0-
4
P0+
6
Ground
8
10
Definition
+5V
P0-
P0+
Ground
Ground