Reset Connector
The reset connector is located on pins 3 and 4 of JF1 and attaches to the reset switch on
the computer chassis. See the table below for pin definitions.
Reset Pin Definitions (JF1)
Pin
3
4
Overheat LED (OH)
Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide advanced
warning of chassis overheating. Refer to the table below for pin definitions.
Overheat (OH) LED Pin Definitions (JF1)
Pin
7
8
GLAN1 LED
The GLAN1 LED connection is located on pins 11 and 12 of JF1. Attach the GLAN1
LED cable to display GLAN1 activity. Refer to the table below for pin definitions.
GLAN1 LED Pin Definitions (JF1)
Pin
11
12
GLAN2 LED
The GLAN2 LED connection is located on pins 9 and 10 of JF1. Attach the GLAN2 LED
cable to display GLAN2 activity. Refer to the table below for pin definitions.
GLAN2 LED Pin Definitions (JF1)
Pin
9
10
32
StorTrends® 1100 User's Guide
Definition
Reset
Ground
Definition
VCC
Ground
Definition
VCC
Ground
Definition
VCC
Ground