Spare Parts - Agilent Technologies VGA 77 User Manual

Spare Parts

Use only Agilent supplied parts unless otherwise indicated.
NOTE
The following spare parts are available from Agilent for your VGA 77:
Module for AA includes reagent module, tubing and connectors
Module for ICP includes module, tubing and connectors
Absorption cell for AA. 2 cells, separator to cell tubing
(fluoro-elastomer)
Flow through mercury cell kit. Includes cell and separator to cell
tubing (fluoro-elastomer)
Cell holder for Mark 7 burner
Cell holder mounting kit for Mark VI burner
Cell holder for Mark V burner mount
Cell holder mounting kit for Mark V burner
Tubing kit for AA
Tubing kit for ICP
Gas/liquid separator kit for AA includes separator and rubber
mounting strap
Gas/liquid separator kit for ICP includes separator and rubber
mounting strap
Fuse, T0.2AH0250V IEC sheet 5, 5 x 20 mm (0.8 in.)
Pump tubes for acid/reductant, black/black (pack of 12)
Pump tubes for sample, purple/black (pack of 12)
Polyethylene capillary tubing 1 m (3.3 ft) lengths.
Fluoro-elastomer tubing, small. 1 m (3.3 ft) lengths.
Fluoro-elastomer tubing, AA. 0.66 m (2.2 ft) lengths, 2.8 mm
(0.110 in.) ID.
Drain tubing from gas-liquid separator (2 meter length required)
2 m (6.6 ft) length, 10 mm (0.4 in.) ID.
Reagent vessel, 500 mL
Replacement drip tray
Agilent Vapor Generation Accessory VGA 77 and VGA 77P User's Guide
Maintenance and Spare Parts
9910062100
9910062200
9910040000
9910040700
110654990
110375990
110317790
410117300
9910061900
9910061800
9910071100
9910062000
1910009300
3710027200
3710027300
2410020500
3710026800
3710026390
3710009200
6610011600
7010017200
79