Installing the Burner Clamp
This section applies to AA modules only.
Do not use the cell with a nitrous oxide–acetylene burner. The cell will be
CAUTION
destroyed if exposed to a nitrous oxide-acetylene flame.
Mark 7 Burner
The VGA 77 is supplied with a cell holder for the Mark 7 burner. The
Mark 7 does not require mounting brackets as the cell holder simply
sits on top of the burner.
Figure 5. Mark 7 burner without holder
To mount the cell holder on the Mark 7 burner:
1
Agilent Vapor Generation Accessory VGA 77 and VGA 77P User's Guide
Position the seat cut-outs of the holder over the back edge of the
burner.
Getting Started
29