Hazard Warnings; Electrical Hazards - Agilent Technologies VGA 77 User Manual

Safety Practices and Hazards
To ensure continued safety of the instrument after maintenance or
service procedures verify the instrument is returned to a safe state
for the user. This includes running performance checks to verify the
instruments safety systems are functioning correctly. Check the
general condition of the instrument during operation for wear or
signs of corrosion that are likely to inhibit function or safety.
Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer's failure to
comply with these requirements.

Hazard Warnings

In addition to the hazard warnings contained in your spectrometer
operation manual, specific hazard warnings have been included in
this operation manual. These warnings state the hazard, describe
how to avoid it and specify the possible consequences of not
following the instructions. Read all warnings carefully and observe
them at all times.

Electrical Hazards

The VGA 77 contains electrical circuits, devices and components
operating at dangerous voltages. Contact with these circuits, devices
and components can cause death, serious injury or painful electric
shock. Covers that are retained by screws on the VGA 77 may be
opened only by Agilent field service engineers.
Use of the wrong supply voltage, connection of the accessory to an
incorrectly wired supply outlet, or lack of proper electrical grounding
can create a fire or shock hazard that can cause death, serious injury,
or serious damage to equipment.


8
Always use a 3-wire outlet with a ground connection that is
adequately rated for the load.
The installation must comply with local, state and national safety
regulations.
Agilent Vapor Generation Accessory VGA 77 and VGA 77P User's Guide