Advertisement
WallBeds Australia Drawer Hardware and Cabinetry Assembly Instructions
Step 4 – Fixing Unit together and to the Wallbed
Once the unit is assembled place it next to the side of the Alpha Bed
Important: Ensure the front edge of the drawer unit is flush with the front edge of the bed cabinet.
Place the bookshelf unit on top of the drawer unit and line up the bottom shelf with the front edge of the
drawer.
The bookshelf will then also line up with the front edge of the bed cabinet. Fix the bookshelf to the side of the
bed cabinet by using the 28mm wood screws supplied. Use an existing top shelf pin hole for this.
To attach the drawer unit to the book shelf, simply remove the top drawer & screw up into the base of the
bookshelf also using the 28mm screws supplied. You may have to pre-drill some holes.
Photo 1
Photo 3
Photo 5
Photo 2
Photo 4
Photo 6
Page 3
Advertisement
