Using The Menu - Interacoustics Eclipse Instructions For Use Manual

7.3

Using the menu

The following section describes the elements of the Menu which is accessible from both DPOAE and
TEOAE module tab:
Menu provides access to Setup, Print, Edit and Help.
Menu | Setup | Protocol setup create custom test protocols, or change the default
•
protocols
Menu | Setup | Temporary setup change protocols temporarily
•
Menu | Setup | Show/Hide protocols hide or show protocols as preferred
•
Menu | Setup | General setup Set specific OAE test parameters and automated print to pdf
•
Menu | Setup | Norm data setup customize and import/export OAE norm data
•
Menu | Setup | Password protection set a password for the setup
•
• Menu | Setup | Language allows selection of one of the available .languages. The language
selection change will come into effect after the IA OAE software is reopened
Menu | Setup | Simulation mode activate the simulation mode, and trial out the protocols or
•
see how data is visualized
Menu | Print preview print, print wizard and print
•
Menu | Edit export the data to an XML file
•
Menu | Help | About OAE software... displays an information window showing the
•
following:
o
o
o
o
Further, you can reach the Interacoustics website from this window by clicking on the link to
www.interacoustics.com
By pressing the License button, you are able to change the license keys of the device. The
license keys for the device are specific for each serial number and define which modules,
tests, protocol settings and other functionalities are available. Never change the license key
without help of an authorized technician
Menu | Help | Documents... launches digital version of the Instructions for Use Manual and
•
Additional information manual (Adobe Reader required)
D-0120578-C – 2019/11
Eclipse – Instructions for Use - US
IA OAE software version
Hardware version
Firmware version
Copyright Interacoustics
Page 81