American Dynamics DV16000 Installation And Operating Instructions Manual page 150

®
Intellex
150
Balance Light
Edge Detect
Image Enhancement Tools
Digital Video Management System Installation and Operating Instructions
Hue — Use this slide control to adjust the hue for the image.
Adjusting the hue represents moving around the color wheel:
(left to right) red, yellow, green, cyan, blue and magenta.
Move the control to the left to increase the amount of red, yellow
or green in the image. Move it to the right to increase the amount
of cyan, blue or magenta in the image. As you move the control,
the image reflects the changes. The brightness chart (if displayed)
also reflects the changes.
Saturation — Use this slide control to adjust the color saturation
for the image. Adjusting the saturation changes the level of each
color in the image.
Move the control to the left to decrease image color. Move it to
the right to increase image color. As you move the control, the
image reflects the changes. The brightness chart (if displayed)
also reflects the changes.
Lightness — Use this slide control to adjust the lightness of
colors in the image. Adjusting the lightness changes the level of
light of each color in the image.
Move the control to the left to decrease the level of light of each
color. Move it to the right to increase the level of light. As you
move the control, the image reflects the changes. The brightness
chart (if displayed) also reflects the changes.
Click OK to close this screen and apply the changes to the image.
Click Cancel to close this screen without making any changes to
the image. Click Help to display online help for this screen.
Use the Balance Light tool to balance the brightness of the image.
The unit redistributes the brightness of the image so it evenly
represents the entire range of brightness.
1. Click down arrow to display a list of tools. Select Balance
Light. The list disappears and Balance Light appears in the
list box.
2. Click Apply to balance the brightness of the image. To
remove the effects of the Balance Light tool after reviewing
the image, click Undo.
Use the Edge Detect tool to locate the edges of objects in an
image. These edges are displayed in black and white. Other
image detail is ignored.
MORE>>>