American Dynamics DV16000 Installation And Operating Instructions Manual page 129

®
Intellex Digital Video Management System Installation and Operating Instructions
Switching Cameras
Image Area Zoom
Playback Screen
To play back images in reverse direction:
NOTE: The farther you drag the arrows on the button
counterclockwise, the faster the playback proceeds in
reverse.
1. Click the Play/Pause button to select either Play mode or
Pause mode. The unit displays Play or Pause.
2. Click and drag the arrows on the Play/Pause knob
counterclockwise. The speed (–1X to –5X) is displayed on the
Play/Pause knob.
3. To return to normal speed and direction (Play mode) or to
pause playback (Pause mode), simply release the mouse
button.
When playing back images, the unit synchronizes all video
segments to the same time. Click a camera button (1–16) to play
back images from a different camera.
If the last image for the newly selected camera was recorded
more than one minute earlier, the unit displays a message. You
can choose whether or not to display the segment.
When you select a different video segment (from the alarm
review screen or a search screen), the unit synchronizes all video
segments to the new segment's time.
At any time, in either menu mode or full-screen mode, you can
zoom in on a specific area of the playback image screen. Then you
can observe activity from that camera more closely.
1. To enlarge an area of the image, click and drag the mouse
pointer over the area to enlarge. As you drag the mouse, the
pointer changes to
NOTE: When zooming to a desired area, the unit maintains a 4:3
(width-to-height) ratio. If you drag tall and thin, the
selected area will not be tall, but will maintain the general
shape of the screen. Likewise, if you drag short and wide,
the selected area will not be wide, but will maintain the
general shape of the screen.
2. After you release the mouse button, the enlarged (zoomed)
area appears.
129
MORE>>>