®
Intellex
102
Changing Users
Basic Operation
Digital Video Management System Installation and Operating Instructions
NOTE: This option is only available if system security is enabled
(see
When another person takes control of the unit, the previous
operator must log out and the new operator must log in.
1.
Click Utility on the main screen. The Utility Options screen
appears.
2.
Click Log Out. A confirmation message appears.
3.
Select one of the following options:
No — Click to close this screen without logging out.
Yes — Click to log out. The Enter PIN Code screen appears
and the unit prevents any access until another user logs in.
4.
Log in the new user (see
Security
Setup).
Logging In
above).
MORE>>>