American Dynamics DV16000 Installation And Operating Instructions Manual page 149

®
Intellex Digital Video Management System Installation and Operating Instructions
Modifying the Image
Brightness/Contrast Tools
Color/Light Tools
Image Enhancement Tools
This section describes how to modify the image using each of the
following tools:
Brightness/Contrast Tools
Color/Light Tools
Balance Light
Edge Detect
Enhance Light
Noise Reduction
Sharpen
Sharpen More
Smooth
Smooth More
NOTE: Each tool has a specific purpose. Therefore, some tools
may not be appropriate for a particular image. Practice
using the tools to learn how they operate. Click Restore
at any time to start over.
Use the brightness/contrast tools to brighten or darken the entire
image and/or to increase or decrease the contrast of light and
dark elements in the entire image.
Brightness — Use this slide control to adjust the brightness for
the image.
Move the control to the left to darken the image. Move it to the
right to lighten the image. As you move the control, the image
reflects the changes. The brightness chart (if displayed) also
reflects the changes.
Contrast — Use this slide control to adjust the contrast for the
image.
Move the control to the left to decrease image contrast. Move it to
the right to increase image contrast. As you move the control, the
image reflects the changes. The brightness chart (if displayed)
also reflects the changes.
Click OK to close this screen and apply the changes to the image.
Click Cancel to close this screen without making any changes to
the image. Click Help to display online help for this screen.
Use the color/light tools to adjust the hue, saturation and
lightness of the entire image.
149
MORE>>>