American Dynamics DV16000 Installation And Operating Instructions Manual page 147

®
Intellex Digital Video Management System Installation and Operating Instructions
Image Enhancement Tools
display the image full-screen. Click anywhere on the image to
exit full-screen mode and display the controls again.
Load — Click to load an image from a destination. Then you can
modify or print it.
NOTE: Only load images that were created on an Intellex unit. If
you modify the image on a computer and want to load it
on the unit, save it in bitmap format with the name
IMAGE.BMP.
NOTE: If you make additional changes using the Image
Enhancement Tools, be sure to save the updated image.
1. Click Load. A selection dialog appears.
2. Use the "virtual keyboard" (or a physical keyboard) to enter
the destination from which to load the image.
3. Highlight the drive letter in the drive selection area and click
Select.
4. Click Yes to load the image. The unit displays the image in
the image area. Use any of the enhancement tools to modify
the image. Click No to cancel the operation and return to the
image enhancement screen.
Save — Click to save an image to a destination. Then it can be
processed by a computer.
NOTE: The name of the image at the destination will be
IMAGE.BMP.
NOTE: You can only save one image at a time to a destination.
1. Display and enhance the image, as required. Click Save. A
selection dialog appears.
2. Use the "virtual keyboard" (or a physical keyboard) to enter
the destination to which to load the image.
3. Click Yes to save the image to the destination. Click No to
cancel the operation and return to the image enhancement
screen.
4. If the destination already contains an image, a message
appears. Click Yes to replace the image on the destination
with the displayed image. The unit erases the old image.
147
MORE>>>