®
Intellex
Digital Video Management System Installation and Operating Instructions
Image Area Zoom
Controlling Image Display
At any time, in either menu mode or full-screen mode, you can
zoom to a specific area of the live image screen. Then you can
observe activity from that camera more closely.
1.
(2x2, 3x3 or 4x4 format only) Click the desired camera image.
The unit displays the selected camera in the 1x1 format and
changes the mouse pointer to
NOTE: When zooming to a desired area, the unit maintains a 4:3
(width-to-height) ratio. If you drag tall and thin, the
selected area will not be tall, but will maintain the general
shape of the screen. Likewise, if you drag short and wide,
the selected area will not be wide, but will maintain the
general shape of the screen.
2.
To enlarge an area of the image, click and drag the mouse
pointer over the area to enlarge. As you drag the mouse, the
pointer changes to
3.
As soon as you release the mouse button, ZOOM appears on
the screen and the pointer changes to
4.
To return to the 1x1 format, click the image area.
5.
(2x2, 3x3 or 4x4 format only) To return to the previous format,
click the screen again.
.
.
.
107
MORE>>>