Canvas HANOVER 064-4016-8 Assembly Instructions Manual page 48

58” media fireplace
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS
USING THE TIMER FUNCTION
The timer button (3) allows you to set the amount of time you want the fireplace/heater to run.
The timer button (3) operates both the flames and the heater function. If the heater is operating
when the timer is set, then the heater is on the timer. If the flames are operating, then the timer
will control the flames. If both the heater and flames are operating when the timer is set, then
the timer controls both the flames and the heater.
Pressing the button in sequence will set the timer for a set interval. This interval period is shown
in the display (1), and the blue LED light turns on to show that the timer function is engaged.
The set intervals are displayed in this table. The timer starts after you select your preferred
interval and release the button; note that the display and blue light will turn off after a few
seconds. There is no clock function for turning the heater or flames on or off at a specific time.
Button Press
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
1
USING THE HEATER CONTROL
Pressing the heater button (4) will turn on or off the heat function. There is no speed
setting for the heater blower. If you turn off the heater using the main power button
(6), the unit will hold the current temperature setting in its memory. When the power
is turned back on, the heater will turn on at the same setting.
To convert from Fahrenheit to Celsius: With the heater on, press and release the
heater button (4) so that the display (1) and LED function indicator (2) lights turn
on (if they are not already on). Then gently press and hold the main power button
(6) for five seconds to enter temperature converting mode. The red LED indicator
flashes five times, then changes to green. Green indicates Celsius mode, and red
indicates Fahrenheit mode. In this converting mode, the display (1) flashes (interval is
0.5 second). Repeat the same process to convert Celsius temperature into Fahrenheit
temperature.
HANOVER MEDIA FIREPLACE
48
Timer Interval
30 Minutes
1 hour
2 hour
3 hour
4 hour
5 hour
6 hour
OFF
3
Display
30
1h
2h
3h
4h
5h
6h
None

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents