Setup
Set configuration options for the Gage.
Set Clock
All measurements are date and time stamped (24 hour format) when stored into
memory. It is therefore important to keep both the date and time current using this menu
option. Use the Up and Down buttons to scroll, and the (-) and (+) buttons to adjust
value. The Gage's date and time can also be viewed in Gage Info and on top of the
main menu.
Reset
Restores factory settings and returns the Gage to a known condition. The following
occurs:
All batches, stored datasets, batch names and screen captures are erased.
Calibration adjustments are returned to the Gage's factory settings. The factory
calibration icon will appear on the display.
Menu settings are returned to the following:
Memory = OFF
Statistics Mode = OFF
HiLo Alarm = OFF
Min Scan = OFF
Reading Tick = ON
Auto Dim = ON
A Scan = OFF
B Scan = OFF
Cal Lock = ON
SE Mode = OFF
USB Stream = OFF
Display = None
SmartCouple = OFF
Bluetooth & Stream = OFF
BLE Keyboard = OFF
WiFi & Access Point = OFF
USB Keyboard & Stream = OFF
Page 7
Need help?
Do you have a question about the PosiTector UTG and is the answer not in the manual?