Pandaboard Bill Of Materials; Pandaboard Pcb Design Information - pandaboard OMAP 4 Series System Reference Manual

Table of Contents

4.5

The Bill of Material for the PandaBoard is provided at the following location:

http://pandaboard.org/content/resources/references

These design materials are *NOT SUPPORTED* and DO NOT constitute a reference design. Only

"community" support is allowed via resources at http://pandaboard.org/content/community/home.

THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT PERMITTED BY

APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT

HOLDERS AND/OR OTHER PARTIES PROVIDE THE DESIGN MATERIALS "AS IS" WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE DESIGN

MATERIALS IS WITH YOU. SHOULD THE DESIGN MATERIALS PROVE DEFECTIVE, YOU

ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

We mean it; these design materials may be totally unsuitable for any purposes.

4.6

The PCB Design information (including the Cadence Allegro 16.2 Board file (.brd file) and PCB Gerber

design files) are provided at the following location: